ISCSI Raptor > Motherboard

Software | Chassis | Motherboard | RAID | Back to Products

X7DBE+
X6DB8
  • 16-DIMM Xeon Dual-Core Blackford ServerBoard

Key Features
1. Dual Intel® 64-bit Xeon® Support,
    667 / 1066 / 1333MHz FSB
2. Intel® 5000P (Blackford) Chipset
3. Up to 64GB DDR2 667 & 533 SDRAM
    Fully Buffered DIMM (FB-DIMM)
4. Intel® (ESB2/Gilgal) 82563EB Dual-port
    Gigabit Ethernet Controller
5. 6x SATA 3.0Gbps Ports via ESB2 Controller
    SATA Controller
6. 2 (x8) & 1 (x4) PCI-Express,
    2x 64-bit 133MHz PCI-X,
    1x 64-bit 100MHz PCI-X
7. ATI ES1000 Graphics with
    16MB video memory
8. SIMLP IPMI 2.0


Product SKUs
MBD-X7DBE+-O
  • X7DBE+ (Standard Retail Pack)
MBD-X7DBE+-B
  • X7DBE+ (Bulk Pack)
 
Physical Stats
Form Factor
  • Enhanced Extended ATX
Dimensions
  • 13.68" x 13" (34.7cm x 33cm)
 
Processor/Cache
CPU
  • Dual 771-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Dual-Core Intel®
      Xeon®Processor
      5300/5100/5000
      sequence (Clovertown
      /Woodcrest/Dempsey processor)
      up to 3.73 GHz
    • NOTE: Motherboard PCB revision 2.0 or above is required to support Xeon® 5100 (Woodcrest) processors
System Bus
  • 1333 / 1066 / 667 MHz system bus
Operating System Software
  • Supports 64-bit Operating Systems
  • Supports 32-bit Operating Systems
 
System Memory
Memory Capacity
  • Sixteen 240-pin DIMM sockets
  • Supports up to 64 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
  • Dual branch memory bus
  • Memory must be populated in pairs
  • Memory Mirroring supported
Memory Type
  • 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 512 MB, 1GB, 2GB, 4GB
Memory Voltage
  • 1.8 V only
  • 1.5V(AMB)
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
  • Intel® 5000P (Blackford) chipset
  • MCH + PXH + ESB2
SATA
  • Intel ESB2 SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • 200-pin IPMI slot (SIMLP)
  • (Optional: AOC-SIMLP)
Network Controllers
  • Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT support for fast, scaleable, and reliable networking
Graphics
  • ATI ES1000 controller with 16 MB of video memory
Super I/O
  • Winbond 83627HG chip
 
Input / Output
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
IDE
  • Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
  • Compact Flash (40-pin connector, IDE 1, single channel) slot
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
  • 1 Floppy controller; 1.44 MB, 2.88 MB
LAN
  • 2x RJ45 LAN ports
USB
  • 2x USB rear ports
  • 3x USB internal headers
  • Total 5 USB 2.0 Compliant / 1.1 Compliant
VGA
  • 1x VGA Port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header
Parallel Port
  • 1 ECP / EEP parallel port
Chassis ( Optimized for X7DBE+ )
2U Chassis
3U Chassis
Tower / 4U Rackmount
Important Chassis Notes
  • To ensure system stability, a 700W (minimum) ATX power supply
    [4-pin (+12V), 8-pin (+12V) and 24-pin are required]
 
Expansion Slots
PCI-Express
  • 2 (x8) PCI-e slots
  • 1 (x4) PCI-e (using x8) slot
  • 1 SEPC (Supermicro PCI-e Power Connector) slot for 2U active riser cards with a power extension (i.e. CSE-RR2UE-AX)
PCI-X
  • 2x 64-bit 133MHz PCI-X (3.3V) slots
  • 1x 64-bit 100MHz PCI-X (3.3V) slot
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features
  • Plug and Play (PnP)
  • SMBIOS 2.3
  • DMI 2.1
  • PCI 2.2
  • ACPI 1.0
  • USB Keyboard support
  • Hardware BIOS Virus protection
 
Management
Software
  • Optional IPMI (Intelligent Platform Management Interface) 2.0
  • Super Doctor III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI Power Management
  • Main Switch Override Mechanism
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • Power-on mode for AC power recovery
  • Internal / External modem remote ring-on
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores, +3.3V, +5V, +5V Standby, & ±12V
  • 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
  • Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans
  • 8x fans with tachometer status monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x fan connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
LED
  • CPU / System Overheat LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
 
Operating Environment / Compliance
RoHS

RoHS 6/6
Environmental Spec.
  • Operating Temperature: 10º to 35º C (50º to 95º F)
  • Non-operating Temperature: -40º to 70º C (-40º to 158º F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
 
OS Compatibility

• Please see our OS Compatibility Chart
Parts List
  Part Number Qty Description
X7DBE+ MBD-X7DBE+-O 1 X7DBE+ Motherboard
Manual(s) MNL-0830 1 Motherboard Manual for X7DBE+
I/O Cables CBL-0010L-01
CBL-0022L
CBL-0036L-02
CBL-0044L
CBL-0083L
1
1
1
6
1
9-pin Serial Port Cable
ATX Floppy Cable
ATA 66/100 IDE LP Cable
2ft. Amphenol, SATA Cable
2-Port USB Cable
Driver Disk CDR-X7 1.02 1 Version 1.02 CD or later
I/O Shield CSE-PT07L 1 Motherboard I/O Shield
Press: JES completes the Osprey Camera Project. High resloution night vision camera for nest observation